Bit Trays for Milwaukee Packout (Large) Toolbox

Bit Trays for Milwaukee Packout Toolbox Close Up View

Description

Large Packout Toolbox Lid

When you remove the smooth cover from the lid of the Packout toolbox (48-22-8424) and large Packout toolbox (48-22-8425) you will see a grid of structural ribbing similar to that of the Packout rolling toolbox, except for the addition of large circular holes that get in the way of mounting bit trays like you can in the rolling toolbox.

This update to the Packout lid bit trays takes a circular chunk out of the bit tray so they will fit into these toolbox lids, but it does so at a price: you loose bit storage. You will only be able to fit one bit holder and you won’t be able to use all the positions in that holder. Still, with eight places you can position the bit trays you can store up to 48 bits in the lid.

These modified bit trays do not press fit into the openings, because you would basically need eight different types of bit tray and I do not want to do the work to print and test a separate bit tray for each opening. So tape or glue is required to keep these bit trays in place.

Even though every opening is shaped slightly differently, they still are somewhat symmetrical so you only need two different types of bit tray, and I’ve provided the STL files for each in the files section along with the model so you can modify the design as you need.

Files

Printer: Prusa i3 MK3
Slicer: PrusaSlicer
Material: Inland PET-G
Resolution: 0.3 mm with a 0.4mm nozzle
Wall Lines/Perimeters: 3
Infill: Minimum 10% Gyroid. The higher infill percentage the stronger the part.
Notes:

Instructions

These are the instructions for keeping the Packout rolling toolbox bit trays stuck in the lid, they will also work for these toolbox bit trays.

Applying VHB tape to the Back of the Bit Trays

To keep the bit trays in place, I recommend using a pressure sensitive tape like 3M VHB tape or using a few dabs of hot glue like in the video below.

7 comments

    1. The bit trays? The ones that he glued into his box? Those are 3D printed. Thats what is in the “files” section. If you dont have a 3D printer & Filament. No doubt you could find someone who might print them for you.

    2. I do not sell anything. I only design them and upload them for other people to use. There may be a few people on my Purchasing page that you can find in the menu on top of the screen.

  1. Amazing work. I love the creativity. Do you have any tutorials on how you plan ideas out? Software used etc…. I would love to learn how to design as well. Thank you

    1. I start by determining the critical measurements of what I’m trying to model. Then I enter those into the software to create a crude model that I print and check to make sure the critical measurements are correct. For instance, in the model above I would take the width and height of one of the pockets and print out a frame with those measurements to test fit. Sometimes it works, sometimes I have to do some sanding or cutting, but it gives me a better idea of what I’m working with to have something physical.

      Then I just add features in and keep refining.

      I primarily use openSCAD because it allows me to publish models that are easily customized by anybody who can download a software package and adjust parameters in a text box. The way I got started was to download other peoples models and just start changing things until I understood them.

Leave a Reply to Justin Cancel reply

Your email address will not be published. Required fields are marked *