Packout Rolling Toolbox Handle Bracket

Packout Rolling Cart Handle Bracket


I got this idea from user BitTorrent on Thingiverse. They designed four printable brackets that slipped over the Packout rolling toolbox handle to hold a power strip. I thought why not make something that holds a 2″ wide strip of aluminum to make a holder for either ToughBuilt ClipTech pouches and bags, or even other Packout organizers.

The bracket model lets you choose the thickness and width of the bar you want to hold. To fit between the handles the bar should be 10.25″ long.

I’ve provided the bracket STLs for 1/8″ x 2″ aluminum stock.


Printer: Prusa i3 MK3
Slicer: PrusaSlicer
Material: Inland PET-G
Resolution: 0.3 mm with a 0.4 mm nozzle
Wall Lines/Perimeters: 3
Infill: Minimum 20% Gyroid. The higher infill percentage the stronger the part.


Installing the Packout Rolling Cart Handle Bracket

You’ll need two brackets. Just print two copies of the included STL file.

You’ll need to remove the handle from the packout rolling cart by removing the two screws at the bottom.

Insert the bar into each of the brackets and work both of the brackets over the handle extrusions at the same time. Once the brackets are completely on the extrusion, they should slide up and down the handle with a some friction.

Replace the handle on the rolling cart and screw it back into place.

Leave a Reply

Your email address will not be published. Required fields are marked *