Unistrut channel nuts are used to attach things to Unistrut (Superstrut). In this case I created them to attach my 3D printed clips (which I haven’t released yet) to Unistrut.
DO NOT use these for professional installs, they are not rated. They are meant to be used with other 3D printed things that do not require holding heavy weights indefinitely.
The channel nuts are designed to accept 1/4-20 nuts, which are press fit into the channel nut after printing.
Printer: Prusa i3 MK3
Slicer: Cura Slicer
Material: Inland PET-G
Resolution: 0.2mm with a 0.4mm nozzle
Wall Lines/Perimeters: 3
Infill: Minimum 25% Gyroid. The higher infill percentage the stronger the part.